LED Drivers 1-10V

This is the simplest form of dimming that works only with an analogue signal from 1V to 10V. The performance is linear, every 1 volt corresponds to a 10% increase in brightness. The LED Driver is connected to a dimmer switch with a pair of control cables. When the dimmer is turned fully clock-wise a 10V signal is transmitted back to the LED light driver and the brightness level reaches 100%

There is no special programming or expensive controllers involved, up to 40 LED light fittings can be controlled from a single switch. Our high-quality dimmable drivers provide smooth, flicker-free dimming from 0% to 100%.

Cable Requirement.

This method requires a 4-core cable. The mains voltage (Live and neutral) is connected to the LED driver, and another pair of cables feed the 1-10V signal.

Compatible Dimmer Switches

A reliable dimmer switch from OSRAM is available on our website (find out more here)

LED DRIVERS WITH 1-10V DIMMING FUNCTION

Recently Viewed Products