Three T8 LED tubes with colour-coded end caps in green, red and blue, showing internal LED strips

Dimmable T8 LED Tube 3ft 90cm (909mm) 12W, 1150 lm, with Driver, Triac, 1-10V or DALI

Warm White 3000K / DALI
£42.95 inc VAT £35.79ex VATIn stock
Skip to product information
Three T8 LED tubes with colour-coded end caps in green, red and blue, showing internal LED strips
Dimmable T8 LED Tube 3ft 90cm (909mm) 12W, 1150 lm, with Driver, Triac, 1-10V or DALI

Dimmable T8 LED Tube 3ft 90cm (909mm) 12W, 1150 lm, with Driver, Triac, 1-10V or DALI

110303-3
Copy
Brand Ledison
Weight 0.25 kg
T812 Watt50,000 hoursDimmable: YES5 years warranty115lm/W
Colour Temperature

Which light colour suits your room?

Colours this product comes in:

Screens show colour differently, so treat this as a guide.
Dimming
£42.95 inc VAT £35.79ex VATIn stock
View full details
UK delivery from £7.99, 2 to 3 working daysThe rate depends on size and weight and is shown at checkout.
Refund, replacement or creditWe pay return postage on faulty or wrong items.
Not sure it fits? Call 024 7767 5575Or check the description and documents below.

Description

A 90cm (3ft) dimmable T8 LED tube, 12W, supplied with an external dimmable LED driver. Dim it with a standard mains dimmer switch, a 1-10V control or DALI.

The driver is small and compact, only 85 x 54 x 32.5mm. It has active power factor correction and reversible protection against short circuit, over temperature and over voltage.

Key facts

  • 12 watts, 1150 lumens
  • Length (pin to pin): 909mm
  • Colour rendering index >80
  • Beam angle: 120 degrees
  • Dims smoothly with no flicker, buzzing or RF interference
  • Up to 50,000 hours
  • 5-year warranty

Dimming options

  • AC Triac: mains dimming with trailing edge dimmer switches, no extra wiring. Works with Varilight V-Pro, Lutron and Osram dimmers
  • 1-10V: needs 1 pair of control cables, positive (blue) and negative (white). Works with 1-10V dimmer switches or resistive potentiometers
  • DALI: digital control with high-precision dimming and lamp status

Installation

  • The tube runs on 36-42V DC from the supplied driver and must never be connected directly to 230/240V mains. Connect the driver to the 240V mains; the driver output (36-42V DC) connects to the tube
  • The tube is polarity sensitive. If it does not light, take it out, turn it 90 degrees and put it back in
  • 1-10V: one dimmer switch can control up to 15 drivers; the dimming wire must not be longer than 20 metres

Good to know

  • CE certificates: Low Voltage Directive (EN 62776:2015) and EMC Directive 2014/30/EU

You may also need

You may also like