LED Emergency Lighting
Emergency LED Lighting / Emergency LED Bulkhead
The LEDISON LED maintained self-test emergency bulkhead has an attractive design and can be used either externally or internally owing to its IP65 rating. It utilises an LED board with multiple rows producing an even spread of light of 1150 lumens in mains operation and 360 lumens in emergency mode. The LEDs have a running time of approximately 50,000 hours.
The internal self-test module will test the unit at intervals as required by BS5266.
The modern design and the unique functionality, make the Ledison LED Bulkhead an ideal solution for main ceiling/wall lighting in Residential Areas, Student Halls, Hospitals, Public Building and even in the Garden
Emergency LED Drivers for T8/T5 tubes and PL Lamps
The Emergency Kit "Emer Kit" is developed to be used with any of the Ledison Tubes and PL lights. The kit is designed to fit into most standard existing fittings. It will provide autonomy to LEDISON LED tubes and LEDISON PL bulbs for up to 4 hours at reduced power (30%), ensuring the minimum legal requirements for emergency lighting are met. The Emergency Kit can be operated in maintained or non-maintained mode. A Green-Red LED indicates the status of the Emergency Kit. The built-in Lithium battery reduces the size of the emergency kit and eliminates extra wires.
The emergency conversion packs for lighting (assembled in the UK) are designed to convert a wide range of LED lights using only two parts. The standard three-cell NI-MH battery will be the best choice for converting standard LED luminaires and arrays.
There are two main versions
- LED arrays from 2 to 20 LEDs in series with a string voltage of 6-55V
- LED arrays from 2 to 30 LEDs in series with a string voltage of 6-80V