LED 2D Lamp 12W, 2D LED Bulb for 4-Pin GR10q / GR8, 1050 lm, Replaces 28W 2D CFL, Mains Direct, Emergency Socket
£17.50
inc VAT
£14.58ex VATIn stock
Skip to product information
LED 2D Lamp 12W, 2D LED Bulb for 4-Pin GR10q / GR8, 1050 lm, Replaces 28W 2D CFL, Mains Direct, Emergency Socket
2D/4pin12 Watt85lm/W50,000 hours80% After 50,000 HoursDimmable: NO
£17.50
inc VAT
£14.58ex VATIn stock
UK delivery from £7.99, 2 to 3 working daysThe rate depends on size and weight and is shown at checkout.
Refund, replacement or creditWe pay return postage on faulty or wrong items.
Not sure it fits? Call 024 7767 5575Or check the description and documents below.
Description
A 12W LED 2D lamp that replaces a fluorescent 2D lamp in an existing round or square 4-pin fitting (GR8 or GR10q). It has its own built-in driver and runs straight from the mains (65-265V AC), with no ballast or starter.
A perforated circuit board carries heat away from the SMD2835 LEDs. The tray has an emergency socket and a charging indicator LED, for use with the emergency conversion kit.
Key facts
- 12 watts, 1050lm
- SMD2835 LEDs
- Beam angle 120 degrees
- Instant start, no flicker
- Standard on/off, not dimmable
- 50,000 hours, 80% lumen maintenance after 50,000 hours
Installation
- Must be fitted by a qualified electrician
- Remove or bypass the existing ballast and starter; connecting them will damage the lamp
- Only live and neutral are needed, rerouted to the GR8 base
- Indoor and dry places only; outdoors it needs an IP65 or higher fitting
Good for
- Corridors and stairwells
- Offices and schools
- Hospitals and residential communal areas
- Emergency lighting fittings