2 Way Light Switch or 2 Gang? Light Switches Explained, from 16AX to Smart
14 min read
The short answer
Gang is how many rockers are on the switch plate; way is how many places control the same light. A 2 gang switch controls two lights from one plate. A 2 way switch has three terminals and pairs with a second switch, so one light works from two places, and an intermediate switch adds a third. 16AX means rated 16 amps and tested for the switch-on surge of fluorescent and LED loads.
Key takeaways
- Gang counts the rockers on one plate; way counts the places that switch the same light.
- A 2 way switch works as a normal one way switch too: use COM and one L terminal.
- Three or more switches for one light need 2 way switches at the ends and an intermediate in between.
- AX ratings such as 10AX and 16AX mean the switch is tested for the switch-on surge of fluorescent and LED drivers.
- Smart and illuminated switches can make LEDs glow when off; smart switches usually need a neutral at the switch and a deeper back box.
On this page
- What is the difference between gang and way?
- What is a 2 gang light switch?
- What is a 2 way light switch and how does it work?
- What is an intermediate switch?
- What does 16AX mean on a light switch?
- Do LED lights need a special light switch?
- Neutral at the switch and smart light switches
- Modern light switches: finishes and back box depth
- Choosing the right light switch: a quick checklist
- If you want the short version
- Common questions
What is the difference between gang and way?
A 2 way light switch and a 2 gang light switch are not the same thing, and mixing them up is the most common reason people order the wrong switch. The two words answer two different questions.
- Gang is how many switches sit on one plate. A 1 gang switch has one rocker, a 2 gang switch has two, a 3 gang switch has three. Each rocker controls its own light or group of lights.
- Way is how many places can control the same light. A 1 way switch is the only switch for that light. A 2 way switch works with a second switch somewhere else, so you can turn the same light on or off from either end of a hallway or staircase.
So a 2 gang 2 way light switch has two rockers on one plate, and each rocker can be wired as either a simple on and off switch or as one end of a two way pair. That is why most switches sold in the UK, including ours, are 2 way: one switch covers both jobs.
| What you see on the label | What it means | Typical use |
|---|---|---|
| 1 gang 1 way | One rocker, two terminals, works on its own | A bedroom or cupboard light with one switch |
| 1 gang 2 way | One rocker, three terminals, can pair with another switch | Hall, landing or a room with two doors; also fine as a single switch |
| 2 gang 2 way | Two rockers on one plate, each 2 way | Kitchen downlights and under cabinet lights from one plate |
| 3 gang 2 way | Three rockers on one plate, each 2 way | Open plan rooms with several lighting zones |
| Intermediate | Four terminals, sits between two 2 way switches | A third switch on a long landing or a room with three doors |
One more trap: American guides call a UK 2 way switch a "3-way" switch, and a UK intermediate a "4-way" switch. If a wiring video talks about 3-way switches, it is using the American names.
What is a 2 gang light switch?
A 2 gang light switch is a single plate with two separate rockers, so you can control two lights, or two groups of lights, from one spot. A common example is a kitchen: one rocker for the ceiling downlights, the other for the lights under the wall cabinets. Each rocker has its own set of terminals on the back and works independently.
In the UK, 1, 2 and 3 gang light switches usually share the same square 86 by 86mm plate and fit a single back box, so going from 1 gang to 2 gang does not mean a bigger hole in the wall. What it does mean is more cores in the box, because each extra light needs its own switched live coming back from the light. If the second light has no cable to the switch position, adding a gang means running a new cable.
Our light switches come in 1, 2 and 3 gang, all 2 way, all rated 16AX, all on an 86 by 86mm plate.
Can I use a 2 gang switch with only one light?
Yes, but one rocker will do nothing. A neater answer is a 1 gang switch, or a 2 gang switch where the second rocker is saved for a light you plan to add later.
What is a 2 way light switch and how does it work?
A 2 way light switch has three terminals on the back, usually marked COM (common), L1 and L2. The rocker connects COM to either L1 or L2. In a two way circuit, two of these switches are joined by two wires called strappers, one between the two L1 terminals and one between the two L2 terminals. The live comes in on the COM of the first switch, and the COM of the second switch sends the live on to the light.
The light is on when both switches point at the same strapper. Flip either switch and the path breaks; flip the other and it is made again. That is how either switch can turn the light on or off, whatever position the other one is in.
Can you use a 2 way switch for one light?
Yes. To use a 2 way switch as a simple one way switch, connect only COM and one of the L terminals and leave the third terminal empty. If the light comes on with the rocker up instead of down, move the wire to the other L terminal. This is why 2 way switches are the default: the same switch works in either circuit.
Can I swap a 1 way switch for a 2 way switch?
Yes, like for like, using COM and one L terminal as above. What you cannot do is make a light two way just by changing the switch. A second switch position needs a cable run between the two switches, which is wiring work for an electrician.
What is an intermediate switch?
An intermediate switch lets you control one light from three or more places. It goes in the middle of a two way circuit, between the two 2 way switches, and has four terminals: two strappers in from one side, two out to the other. Its rocker either passes the strappers straight through or crosses them over. Every time any of the switches is flipped, the light changes state.
You will find intermediate switches on long landings, in rooms with three doors and in large open plan spaces. You can add as many intermediates in a row as you need, with a 2 way switch at each end. An intermediate switch looks like a normal switch from the front, so check the back or the label before you replace one. If you need one, call us on 024 7767 5575 and we will help you find a match for your plates.
Get this right
Count the rockers you need on the plate (gangs) and the number of places each light is switched from (ways). Then check the back of the old switch: two terminals is one way, three is two way, four is intermediate. Take a photo of the wiring before you disconnect anything.
What does 16AX mean on a light switch?
The number is the current the switch is rated to carry, in amps. The X means the switch has also been tested for fluorescent lamp loads. Fluorescent fittings, and the drivers inside LED lamps and fittings, draw a short surge of current at the moment they switch on, much higher than their running current. That surge is hard on switch contacts. An X rated switch has been tested to handle it, so the contacts are less likely to pit, weld or wear early.
| Rating | What it means | Where it fits |
|---|---|---|
| 6A or 10A | Rated current only, no fluorescent load test shown | Small domestic lighting loads |
| 10AX | 10A, tested for fluorescent loads | Most home lighting circuits, including LED |
| 16AX | 16A, tested for fluorescent loads, more headroom | Homes and light commercial, larger LED groups |
| 20A or 20AX | 20A rated contacts | Heavier loads, such as larger commercial lighting groups |
A typical home lighting circuit is protected at 6A or 10A at the consumer unit, so the switch rating is headroom, not the size of the circuit. A 16AX switch on a 6A lighting circuit does not let you put more lights on it. What the higher rating buys you is contacts that cope better with the switch-on surge of many LED drivers at once, which is the real wear on a lighting switch today. All our light switches are 16AX.
For a very large group of LED fittings, such as a warehouse row of high bays, the combined switch-on surge can exceed what any wall switch is designed for. An electrician will usually switch these through a contactor, with the wall switch only operating the contactor.
Do LED lights need a special light switch?
Not for simple on and off switching. Any standard mechanical light switch works with LED lamps and fittings, and an X rated switch is a sensible choice because of the switch-on surge. Problems come from three other kinds of switch.
- Dimmer switches. Old dimmers built for halogen often make LEDs flicker or buzz. Use an LED rated, usually trailing edge, dimmer and dimmable lamps. Our dimmer switch guide covers how to size one, and our LED dimmer switches include 2 way models, so you can pair a dimmer at one end with a standard 2 way switch at the other.
- Illuminated switches. A switch with a small locator light or neon powers that light by letting a tiny current through the lamp while it is off. A halogen bulb never showed it. An LED lamp can glow faintly or blink.
- Smart switches without a neutral. They power their electronics the same way, through the lamp, and LEDs can glow, flicker or fail to switch fully off.
That faint glow is often called ghosting. We cover the causes and fixes in why LED lights flicker, buzz or glow when off. The short version: a plain switch, or a smart switch that uses a neutral, avoids it.
Neutral at the switch and smart light switches
Many UK homes are wired with the neutrals joined at the ceiling rose or a junction box, and only two cores going down to the switch: the permanent live and the switched live. That is enough for an ordinary switch. A smart switch needs power for its own radio and electronics all the time, and the clean way to get it is from a neutral at the switch position.
Recent installations often have a neutral at the switch, and newer editions of the wiring regulations expect one in new work, but plenty of older homes do not. Before you buy a smart switch, turn the power off at the consumer unit, take the switch off the wall and look: a blue core, or a cable with a neutral terminated in the box, is a good sign, but only an electrician can confirm what each core is.
Smart modules that sit behind a standard switch
Our smart Wi-Fi and Zigbee switches are small modules that fit in the wall box and take a push switch input, so you keep a normal looking plate. The Skydance SS-B works over Wi-Fi with the Tuya app and voice control from Amazon Alexa and Google Assistant. The SS-B(WZ) is the Zigbee version, which connects through a Zigbee hub such as our WG-Z gateway. Both modules:
- need a neutral wire;
- switch 100 to 240V AC loads up to 1.5A, listed as 150W to 360W;
- measure 52 by 52 by 26mm, so they need room in the back box behind the switch;
- also accept a 2.4GHz RF remote, up to 30m in open space.
There is also a Zigbee dimmer version for dimmable LED lamps, with leading or trailing edge set by a DIP switch, which also needs a neutral.
Modern light switches: finishes and back box depth
Modern light switches come in far more finishes than white plastic. Ours come in white, black, tempered glass in white or black, brushed stainless steel, brushed steel with black inserts, and brushed gold. Matching switches and sockets in the same finish across a room is what makes a switch plate look deliberate rather than an afterthought, so pick the finish for the whole room, not one switch at a time.
| Finish | Suits | Worth knowing |
|---|---|---|
| White | Any room, rentals, refurbishments | Disappears on white walls; easiest to match later |
| Black | Dark or contrast walls, modern kitchens | A strong contrast on pale walls |
| Tempered glass, white or black | Modern kitchens and living rooms | Flat, wipe-clean front |
| Brushed stainless steel | Kitchens, hallways, light commercial | Hides marks well; a metal plate must be earthed |
| Brushed gold | Feature walls, period styling | Pair with gold sockets so the room matches |
Back box depth is the other thing to check. Our light switches have a raised slim profile, a screwed faceplate and screw terminals, and need a 25mm back box. If you are replacing a switch on an existing 25mm or deeper box, it will fit. A shallow 16mm box, often found behind older switches on plasterboard, may not leave enough room for the switch and the cables. A smart module behind the switch needs more depth again, so fit the deepest box the wall allows.
How high should a light switch be?
There is no single rule for existing homes. For new homes in England, Building Regulations guidance on access (Approved Document M) puts switches and sockets in habitable rooms between 450mm and 1200mm above the finished floor, so they can be reached from a wheelchair or without bending low. In practice, most light switches go by the door, on the handle side.
Choosing the right light switch: a quick checklist
- Count the lights you want to control from this spot. That is your number of gangs.
- Check how many places each light is switched from. One or two places: a 2 way switch. Three or more: 2 way switches at the ends and an intermediate in between.
- Check the back of the old switch before buying: two, three or four terminals, and how many cores.
- Choose 10AX or 16AX for LED lighting.
- If you want dimming, choose an LED rated dimmer and check every lamp is dimmable.
- If you want smart control, check for a neutral at the switch and enough back box depth.
- Pick one finish for the switches and sockets in the room, and check the back box depth they need.
Safety: when to call an electrician
Turn the circuit off at the consumer unit and check it is dead before you touch a switch. Replacing a switch like for like is a common job, but adding a switch position, adding a gang that needs a new cable, adding a neutral, fitting smart modules and any work in a bathroom are jobs for a qualified electrician. Electrical work in homes in England and Wales falls under Part P of the Building Regulations, and some work must be notified. Call an electrician too if a switch feels warm, crackles or smells of burning, if you find old wiring colours you are not sure of, or if the switch seems to be in the neutral. For bathrooms, see our guide to bathroom zones and IP ratings.
For installers
- Ledison light switches: 1, 2 and 3 gang, all 2 way, 16AX, rocker, screw terminals, screwed faceplate, raised slim profile, 86 by 86mm, need a 25mm back box. Finishes: white, black, white or black tempered glass, brushed stainless steel, brushed steel and black, brushed gold.
- Skydance SS-B (Wi-Fi) and SS-B(WZ) (Zigbee): relay output, 100 to 240V AC, max 1.5A (150W to 360W), push switch input plus 2.4GHz RF, neutral required, 52 by 52 by 26mm, IP20, 5 year warranty.
- Zigbee triac dimmer: 1 channel, 150W/360W at 100V/240V, leading or trailing edge by DIP switch, neutral required.
- Dimmers: most Varilight V-Pro rotary dimmers are listed as 2 way (or 1 or 2 way), so a dimmer at one end and a 2 way switch at the other works on a standard strapper circuit.
- Ghosting on LED: avoid neon or locator switches without a neutral on low wattage LED circuits; long strapper runs can also induce enough current to make a lamp glow.
If you want the short version
Gang is how many rockers are on the plate. Way is how many places control the same light: a 2 way light switch pairs with a second switch, and an intermediate adds a third. 16AX means 16 amps and tested for the switch-on surge of fluorescent and LED loads. Plain switches work with any LED; dimmers, illuminated and smart switches need more care, and smart switches usually need a neutral. Check the back box depth before you buy, and leave new switch positions and new cables to an electrician.
Products that help
2 Gang Light Switch
From £10.99
1 Gang 2 Way Switch
From £9.99
Tempered Glass Light Switch
From £10.99
Smart Light Switch WiFi and RF
From £23.95
See all Sockets & Switches · See all Smart WiFi Switches · See all LED Dimmer Switches · Why Are My LED Lights Flickering, Buzzing or Glowing When Off? · Dimmer Switch for LED Lights: Trailing Edge, Minimum Load and How Many Lamps · Bathroom Zones Explained: Which IP Rated Lights Go Where (UK)
Common questions
What is a 2 gang light switch?
One switch plate with two separate rockers, each controlling its own light or group of lights. In the UK it usually fits the same single 86 by 86mm back box as a 1 gang switch.
What is the difference between 1 way and 2 way light switches?
A 1 way switch has two terminals and is the only switch for its light. A 2 way switch has three terminals (COM, L1, L2) and can pair with a second switch so the light works from two places. A 2 way switch can also be wired as a 1 way switch.
Can you use a 2 way switch for one light?
Yes. Connect COM and one L terminal and leave the other empty. If the rocker works upside down, move the wire to the other L terminal.
What does 16AX mean on a light switch?
The switch is rated for 16 amps, and the X means it has been tested for fluorescent lamp loads, which draw a surge at switch-on. LED drivers draw a similar surge, so an AX rating is a good sign for LED lighting.
What is an intermediate switch?
A four terminal switch that sits between two 2 way switches so one light can be controlled from three or more places. It either passes the two strapper wires straight through or crosses them over.
Do smart light switches need a neutral?
Most do, because the electronics need power all the time. Our Skydance Wi-Fi and Zigbee switch modules list a neutral wire as required. Without one, smart switches often make LED lamps glow or flicker when off.
Can I replace a light switch myself?
A like for like swap is a common job if you isolate the circuit and check it is dead first. Adding switch positions, new cables, a neutral or anything in a bathroom is work for a qualified electrician, and in England and Wales it falls under Part P of the Building Regulations.
Planning a lighting project?
Need a part matched, a datasheet or a price for a large order? Call us or send a message.