IP Rating Chart: IP44, IP65, IP67 and IP68 Explained for Lights

8 min read

Brick house wall in the rain at dusk with a black outdoor LED bulkhead light giving warm white light beside the front door

The short answer

An IP rating has two digits. The first, 0 to 6, is protection against solids and dust; the second, 0 to 9, is protection against water. IP44 resists splashes, IP65 is dust tight and resists water jets, IP66 resists powerful jets, IP67 survives short immersion and IP68 continuous immersion. Most UK outdoor lights should be IP65.

Key takeaways

  • First digit dust, second digit water. An X means not tested.
  • IP44 suits splashes and sheltered spots; IP65 is the usual choice for exposed walls, gardens and over showers.
  • Jets (5 and 6) and immersion (7 and 8) are different tests. Look for both codes, such as IP66/IP67, if a light faces both.
  • Most water problems come from glands, unused entries and junction boxes, not the light.
  • IP says nothing about impact or corrosion. Check the IK rating and the materials too.
On this page
  1. What an IP rating means
  2. IP rating chart: every digit explained
  3. The ratings you will see on lights
  4. IP44 meaning, and IP65 vs IP44
  5. IP65 vs IP66 vs IP67
  6. IP67 vs IP68
  7. Is IP65 waterproof?
  8. What IP rating do outdoor lights need?
  9. Why IP65 lights still let water in
  10. How IP ratings are tested
  11. IP is not impact or corrosion protection
  12. If you want the short version
  13. Common questions

What an IP rating means

An IP rating tells you how well a light, or any electrical product, keeps out solids and water. IP stands for ingress protection. The code has two digits: the first is protection against solid objects and dust, from 0 to 6, the second is protection against water, from 0 to 9. The higher each number, the more protection. This IP rating chart explains every digit, the ratings you actually meet on lights, and which one to choose for each place.

How to read IP65: the first digit 6 means dust tight, the second digit 5 means protected against water jets IP 6 5 First digit: solids 6 = dust tight Second digit: water 5 = water jets 0 to 6: from no protection to dust tight 0 to 9: from no protection to hot, high pressure jets
Read the two digits separately. IP65 means dust tight and protected against water jets from any direction.

IP rating chart: every digit explained

First digit: solid objects and dust

Digit Protected against In practice
0 No protection Not tested
1 Objects over 50mm The back of a hand
2 Objects over 12.5mm Fingers
3 Objects over 2.5mm Tools and thick wires
4 Objects over 1mm Most wires, screws, large insects
5 Dust protected Some dust may get in, not enough to stop it working
6 Dust tight No dust gets in

Second digit: water

Digit Protected against In practice
0 No protection Not tested
1 Dripping water Condensation falling straight down
2 Dripping water with the product tilted up to 15 degrees Drips at a slight angle
3 Spraying water up to 60 degrees from vertical Light rain
4 Splashing water from any direction Rain and splashes
5 Water jets from any direction A hose, driving rain
6 Powerful water jets Heavy seas, jet washing at a distance
7 Temporary immersion, up to 1m Puddles, short flooding
8 Continuous immersion beyond 1m, on the maker's terms Ponds and fountains
9 Close range, high pressure, high temperature jets Steam cleaning in food and vehicle washing

An X in place of a digit, as in IPX4, means that part was not tested or not stated. IPX4 tells you about water only; it says nothing about dust.

The ratings you will see on lights

Rating What it means Typical use Ledison examples
IP20 Finger safe, no water protection Dry indoor rooms LED tubes, Uranus battens
IP44 Objects over 1mm, splashing water Bathroom zone 2, sheltered porches Saxby Knight bathroom spots, Saxby stainless outdoor downlight
IP54 Dust protected, splashing water Covered outdoor walls, utility rooms Omega ceiling lights, Naturous up and down wall light, 15W PIR flood light
IP65 Dust tight, water jets Exposed walls, gardens, bathrooms, wash-down areas Calipso fire rated downlights, tri-proof and non-corrosive fittings, Nova bulkheads, Pluto wall lights
IP66 Dust tight, powerful water jets Very exposed sites, floodlights, street lights CoB flood lights, Hyperion street lights
IP67 Dust tight, temporary immersion Low walls, places where water can pool VersaBeam wall pack, Glacial IP67 metal case drivers
IP68 Dust tight, continuous immersion Ponds, fountains, in-ground lights We do not list IP68 fittings at present

IP44 meaning, and IP65 vs IP44

IP44 means protected against solid objects over 1mm and against splashing water from any direction. It is the minimum you will usually see for bathroom lights outside the shower area and for lights under a deep porch.

IP65 is a big step up on both digits: dust tight rather than 1mm, and water jets rather than splashes. That is why IP65 is the usual choice for exposed outside walls, garden lights and the ceiling over a shower.

IP44 IP65
Solids Objects over 1mm Dust tight
Water Splashes from any direction Water jets from any direction
Good for Bathroom zone 2, sheltered porches, covered patios Exposed walls, gardens, above showers, garages that get hosed down
Not for Open walls facing the weather, wash-down areas Places where water pools or the light goes underwater

IP65 vs IP66 vs IP67

All three are dust tight. The difference is the water test.

  • IP65: water jets from a 6.3mm nozzle. Rain, hoses and splashes.
  • IP66: powerful jets from a 12.5mm nozzle. Exposed coasts, high masts, floodlights facing the weather.
  • IP67: temporary immersion up to 1m. For fittings that may sit in standing water for a short time.

Here is the catch: a higher second digit does not always include the lower ones. The jet tests (5 and 6) and the immersion tests (7 and 8) are different tests. A product that passed immersion may not have been tested with jets. Products that pass both are often marked with both, such as IP66/IP67. If a light will face jets and pooling water, look for both codes.

IP67 vs IP68

IP67 covers short immersion up to 1m, typically for 30 minutes. IP68 covers continuous immersion deeper than 1m, on terms the maker sets, so an IP68 product should also state the depth and time. For pond, pool and fountain lights, IP68 is the rating to ask for, along with a supply and connections that are rated for being underwater too.

Is IP65 waterproof?

IP65 is water resistant to jets and rain from any direction, which is what most people mean by weatherproof. It is not rated for immersion. An IP65 light on an outside wall is fine in the worst British weather; the same light in a puddle or under water is not.

Get this right

Pick the second digit for the water the light will really meet: 4 for splashes, 5 for rain and hoses, 6 for exposed sites, 7 or 8 for standing water. Then make sure the connections and the cable entry are rated just as high.

What IP rating do outdoor lights need?

Where Suggested minimum Notes
Under a deep porch or canopy IP44 Only where rain cannot reach it directly
Exposed house wall, soffit, driveway IP65 The usual choice for UK outdoor lights
Garden spots, bollards, path lights IP65 Keep connections above ground level in rated boxes
Floodlights, car parks, sports pitches IP65 to IP66 Exposed to wind-driven rain at height
Coastal sites IP66 Also check corrosion resistance; IP says nothing about salt
Ground level where water collects IP67 Short immersion only
Ponds, fountains, pools IP68 Ask the maker for depth and time
Garages, plant rooms, wash-down areas IP65 Tri-proof fittings also resist dust and impact

For bathrooms, the rating depends on the zone. Above the bath or shower, the zone rules call for at least IPX4, or IPX5 where water jets are used, so IP65 is the simple choice for a bathroom ceiling. Ask a qualified electrician which zone each light falls in.

Why IP65 lights still let water in

The IP rating applies to the product as tested, fitted the way the maker intends. Most water problems are in the installation, not the light.

  • Cable glands: a gland only seals round cable of the size it was made for. Too thin a cable, or flat twin in a round gland, leaves a gap.
  • Unused entries: every spare knockout or entry needs its blanking plug.
  • Connections outside the fitting: a joint in an IP20 box behind an IP65 light undoes the rating. Use a junction box rated as high as the light.
  • Mounting the wrong way up: some fittings are only rated in one orientation, often with the cable entry at the bottom so water runs away from it.
  • Damaged seals: over-tightened screws, pinched gaskets and seals left off after a lamp change.
  • Condensation: warm, damp air can get drawn in as a fitting cools. Sealed LED fittings with no lamp to change suffer less than older types.

How IP ratings are tested

IP ratings come from standard tests on the product as made: a probe or dust chamber for the first digit, and drips, sprays, jets or a tank of water for the second. The tests use fresh water at normal temperatures, on a new product fitted the way the maker intends. That is why a rating is only as good as the installation, and why it tells you nothing about salt spray, cleaning chemicals or years of sunlight on the seals. Where a light will face those, check the materials and the maker's notes as well as the IP code.

IP is not impact or corrosion protection

An IP rating says nothing about knocks or salt. Impact is shown separately as an IK rating; our non-corrosive fittings, most of our tri-proof fittings and our Litwell bollards are IK08, and our VersaBeam wall pack is IK06. For corrosion, check the materials and the product notes. Our non-corrosive fittings have a full plastic case, and some metal outdoor fittings state that they are not for marine use.

Safety: when to call an electrician

Outdoor and bathroom wiring has extra rules for protection, cable and connections. Ask a qualified electrician to install mains outdoor lights and any light in a bathroom. Electrical work in homes in England and Wales falls under Part P of the Building Regulations, and new outdoor circuits and bathroom work need particular care.

For installers

  • IP65 tri-proof: 60cm 20W to 150cm 65W, V0-rated polycarbonate diffuser, optional microwave sensor and emergency pack; the 60cm, 120cm and 150cm models are IK08.
  • Non-corrosive vapour proof: 2ft, 4ft and 5ft, IP65, IK08, full plastic case, Philips Xitanium driver.
  • VersaBeam wall pack: IP67, IK06, 30W, 40W or 60W selectable, 3000K, 4000K or 5000K selectable, minus 40C to plus 50C.
  • Flood lights: CoB 15W to 150W at IP66; Draco 50W and FL14S PIR at IP65.
  • Drivers: Glacial IP67 metal case 24V drivers for outdoor strip and signage.

If you want the short version

First digit dust, second digit water. IP20 for dry rooms, IP44 for splashes, IP65 for exposed walls, gardens and over showers, IP66 for very exposed sites, IP67 for short immersion and IP68 for underwater. Jets and immersion are separate tests, and the connections must match the light.

Products that help

See all Outdoor · See all LED Outdoor Fittings · See all LED Tri-Proof Lights · Bathroom Zones Explained: Which IP Rated Lights Go Where (UK) · PIR Sensor Light vs Microwave: Why Your Security Light Keeps Coming On · LED Strip Lights: The Complete Guide to Tape, Drivers and Profiles

Common questions

What does IP65 mean?

The 6 means dust tight and the 5 means protected against water jets from any direction. It is the usual rating for outdoor wall lights and lights above a shower.

What does IP44 mean?

Protected against solid objects over 1mm and against splashing water from any direction. It suits bathroom zone 2 and sheltered porches, but not exposed walls.

Is IP65 better than IP44?

Yes, on both digits: IP65 is dust tight instead of keeping out objects over 1mm, and resists water jets instead of splashes.

Is IP65 waterproof?

It resists rain and water jets from any direction, which is what most people mean by weatherproof. It is not rated for being submerged; for that you need IP67 or IP68.

What is the difference between IP67 and IP68?

IP67 covers temporary immersion up to 1m. IP68 covers continuous immersion beyond 1m on terms the maker states, so it suits ponds and fountains.

What IP rating do outdoor lights need?

IP44 only under a deep porch or canopy, IP65 for exposed walls and gardens, IP66 for very exposed or coastal sites, and IP67 or IP68 where water can pool or cover the light.

What does the X mean in IPX4?

The X means that digit was not tested or not stated. IPX4 tells you the product resists splashing water, but says nothing about dust.